As a customer or user of Indihome Internet, and using the ZTE F609 WiFi modem . Well, in this article, we will share information related to the Indihome modem.
From how to login to the Admin page, reset the modem, change the WiFi name, and how to change the password to provide maximum security for your network.
ZTE F609: Indihome Modem and Router.
ZTE F609 is the most frequently encountered and used modem router by most Telkom Indihome and CBN Internet customers. This modem has the ZXHN F609 model which can manage WiFi, WAN, and other security settings.
So, for those of you who are using this Indihome modem for the first time, we will provide a guide that might be useful for you:
How to Login ZTE F609
To be able to make further settings, you must first be able to log in to the Modem. To be able to log in, make sure you are connected to the modem first. You can see the modem’s default password and IP information on the back of the modem.
There are two ways to connect or connect directly to the modem. With a WiFi network or with a LAN cable.
Once you are connected to the modem, the modem will automatically assign an IP to the connected PC or laptop. Here you will find out information about the IP of the modem.
The default Indihome Modem IP is: 192.168.1.1
Here’s how to easily log in to this Indihome modem:
1. After you are connected to the modem, first check your network configuration with “cmd” type the command “ipconfig” and see the “default gateway” IP. You can see the IP of your modem.
2. Open the browser and enter the modem Gateway IP address 192.168.1.1 in the browser URL column.
3. If the IP address cannot be accessed and you did not follow the first step above, it could be that your modem has been previously set up, try using the IP combination 192.168.0.1 or 192.168.1.254 and 192.168.100.1 .
4. On the modem login page, enter the username and password found on the back of the modem. Adjust the password from upper or lower case so that there is no mistake.
4. Here are several combinations of usernames and passwords for Indihome modems that we have summarized from several sources and troubleshooting forums:
ZTE F609 Password Collection
USERNAME ZTE F609 | PASSWORD ZTE F609 |
user | user |
admin | admin |
admin | Telkomdso123 |
user | Web@0763 |
admin | Fs@1500879 |
root | admin |
admin | @LN2018FmZTEzxhn |
support | theworldinyourhand |
admin | zep2kjzol |
admin | Fs@1500878 |
support | support |
admin | telkomjatineg4r4 |
admin | Pq@54r!e8ow&q#u |
admin | Qc!80ebor3#to#b |
admin | Yu9j#4qa!rth#y |
admin | Mn@lh4!nk9#m |
admin | Dj9@t!n03g4r6#f |
root | admin |
Cara Reset Modem ZTE F609 WiFi
If all the above methods do not work, the following method is what you can do. This method is commonly known as “Hard Reset”. By doing a hard reset, you will return all modem settings to factory settings.
By doing a hard reset, it is expected that you can log in to the zte f609 modem and make settings. Here are the steps:
1. Prepare a toothpick or small blunt needle.
2. Turn on the modem, and make sure all the indicator lights are on.
3. Look at the side of the modem, and look for a small hole there.
4. Insert the needle or toothpick into the hole in the modem, then hold for a few seconds until all the indicator lights go out. Then release the pressure.
5. The indicator light will come back on after a few moments, which means the reset process is complete.
6. You can do the steps from the beginning that we have explained above to connect to the modem.
We have practiced the above methods and they have been successful, of course these steps are based on our personal experience.
The steps we have explained are quite simple, so don’t be afraid even if you are a beginner. The conclusion is, make sure the modem is in the default state, if you are not sure the modem is not in the default state, you can do a hard reset to return the settings to default.
After a successful reset, you can follow the steps we have outlined above. We hope this article is useful for those of you who are new to using this modem.
Thank You.